AEG F55200VI0 User Manual download pdf (Page 20)

The cleaning results are not satisfactory

Limescales particles on the

dishes

• The salt container is empty.

• The water softener is adjusted on a wrong level.

• The salt container cap is not closed correctly.

The dishes are wet and dull • No rinse aid has been used.

• The rinse aid dispenser is empty.

There are streaks, milky

spots or a bluish coating on

glasses and dishes

• Decrease the rinse aid dosage.

Dry water drop signs on

glasses and dishes

• Increase rinse aid dosage.

• The detergent can be the cause.

TECHNICAL DATA

Dimensions Width

Height

Depth

54,5 cm

44,7 cm

49,4cm

Electrical connection - Voltage

- Overall power - Fuse

Information on the electrical connection is given on the rating

plate on the inner edge of the dishwasher door.

Water supply pressure Minimum

Maximum

0,8 bar (0,08 MPa)

10 bar (1,0 MPa)

Capacity 6 place settings

INSTALLATION

WARNING!

Make sure that mains plug is disconnected from the mains socket during installation.

Fitting the appliance

Obey the instructions in the enclosed template to:

• Build-in the appliance.

• Install the furniture panel.

• Connect to the water supply and drain.

Remove all packaging before you move the dishwasher into position.

Put the appliance adjacent to a water tap and a drain.

When you put the appliance in place, make sure that the water hoses are not kinked or

squashed.

Install the appliance on a shelf in a furniture of the kitchen.

Make sure that:

• The furniture is correctly attached to the wall.

Technical data

1 2 ... 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

AEG F55200VI0 User Manual Page 20

Comments to this Manuals

Related products and manuals for Dishwashers AEG F55200VI0