AEG F50872 User Manual

FAVORIT 50872User manual Dishwasher

3. Using the funnel provided, pour in the saltuntil the container is full.4. Replace the cap making sure that there isno trace of salt on the screw th

2. Add the rinse aid in the container. Themaximum level for filling is indicated by"max".The dispenser holds about 110 ml of rinseaid, which

Loading cutlery and dishesSponges, household cloths and any object that can absorb water may not be washed in thedishwasher.• Before loading the dishe

The lower basketLoad larger and heavily soiled dishes and pans inthe lower basket.To make it easier to load larger dishes, the 2 plateracks on the rig

1. Place the grid insert on the cutlery basket.2. Place forks and spoon in the cutlery basketwith their handles pointing downwards.For larger utensils

• The cup racks can be folded up out of the wayfor tall crockery items.• Lay or hang wine and brandy glasses in theslots in the cup racks.Adjusting th

Fill with detergent1. Open the lid.2. Fill the detergent dispenser (1) with deter-gent. The marking indicates the dosinglevels:20 = approximately 20 g

Multitab functionThis appliance is equipped with the "Multitab function", that allows the use of the "Multitab"combi detergent tab

If you decide to turn back to the use of standard detergent system we advise that you:1. Deactivate the "Multitab function".2. Fill up the s

Select and start a washing programmeSelect the washing programme and delay start with the door slightly opened. The start ofthe programme or the count

Thank you for choosing one of our high-quality products.To ensure optimal and regular performance of your appliance please read thisinstruction manual

• The dishwasher will automatically stop.• The light of the programme just ended will remain on.• In the digital display appears a zero.1. Switch off

2. The dishwasher filter system comprises acoarse filter ( A ), a microfilter ( B ) and aflat filter. Unlock the filter system usingthe handle on the

If residues of soil have clogged the holes in the spray arms, remove them with a cocktailstick.External cleaningClean the external surfaces of the mac

Fault code and malfunction Possible cause and solution appears in the digital display.The dishwasher does not fill with water.• The water tap is block

The wash results are not satisfactoryThe dishes are not clean • The wrong washing programme has been se-lected.• The dishes are arranged in such a way

Remove all packaging before positioning the machine.If possible, position the machine next to a water tap and a drain.Fitting under a counter (kitchen

Water connectionWater supply connectionsThis appliance can be connected to either a hot (max. 60°) or cold water supply.With a hot water supply you ca

WARNING!Warning! Dangerous voltage.Water outlet hose connectionThe end of the drain hose can be connected in the following ways:1. To the sink outlet

To avoid water leakage after installation make sure that the water couplings are tight.Electrical connectionWARNING!Safety standards require the appli

29

Operating instructions Safety informationIn the interest of your safety and to ensure the correct use, before installing and first usingthe appliance,

30

31

www.electrolux.com117955170-012009

• Keep children well away from the dishwasher when the door is open.Installation• Check your dishwasher for any transport damage. Never connect a dama

Product description1 Upper basket2 Water hardness dial3 Salt container4 Detergent dispenser5 Rinse aid dispenser6 Rating plate7 Filters8 Lower spray a

Control panel1 On/Off button2 Programme selection buttons3 Delay start button4 Indicator lights5 Digital display6 Function buttonsIndicator lightsProg

Indicator lightsRinse aidIlluminates when the rinse aid has run out. 1)1) The salt and rinse aid indicator lights are never illuminated while a washin

• Pour 1 litre of water inside the salt container and then fill with dishwasher salt• Fill the rinse aid dispenserIf you want to use combi detergent t

1. Open the dishwasher door.2. Remove the lower basket from the dish-washer.3. Turn the water hardness dial to position 1or 2 (see table).4. Replace t