AEG BC3331302 User Manual download pdf (Page 21)

8. Release the locking system to

remove the glass panels.

9. Turn the two fasteners by 90° and

remove them from their seats.

90°

10. First lift carefully and then remove

the glass panels one by one. Start

from the top panel.

11. Clean the glass panels with water

and soap. Dry the glass panels

carefully.

When the cleaning is completed, install

the glass panels and the oven door. Do

the above steps in the opposite

sequence.

Make sure that you put the glass panels

(A and B) back in the correct sequence.

The first panel (A) has a decorative

frame. The screen-printing zone must

face the inner side of the door. Make

sure that after the installation the surface

of the glass panel frame (A) on the

screen-printing zones is not rough when

you touch it.

A B

Make sure that you install the middle

panel of glass in the seats correctly.

10.7 Replacing the lamp

Put a cloth on the bottom of the interior

of the appliance. It prevents damage to

the lamp glass cover and the cavity.

ENGLISH

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

No comments

AEG BC3331302 User Manual Page 21