AEG SCN71800S1 User Manual download pdf (Page 13)

Problem Possible cause Solution

The appliance has no

power. There is no volt-

age in the mains socket.

Connect a different electri-

cal appliance to the mains

socket.

Contact a qualified electri-

cian.

The lamp does not

work.

The lamp is in stand-by. Close and open the door.

The lamp is defective. Refer to "Replacing the

lamp".

The buzzer sounds.

The Alarm light

flashing.

The temperature in the

freezer is too high.

Refer to "High Tempera-

ture Alarm".

The compressor op-

erates continually.

The temperature is not

set correctly.

Set a higher temperature.

The door is not closed

correctly.

Refer to "Closing the

door".

The door has been

opened too frequently.

Do not keep the door

open longer than necessa-

ry.

The product temperature

is too high.

Let the product tempera-

ture decrease to room

temperature before stor-

age.

The room temperature is

too high.

Decrease the room tem-

perature.

The compressor

does not start imme-

diately after press-

ing the FROSTMAT-

IC or COOLMATIC

button, or after

changing the tem-

perature.

This is normal, no error

has occurred.

The compressor starts af-

ter a period of time.

Water flows on the

rear plate of the re-

frigerator.

During the automatic de-

frosting process, frost de-

frosts on the rear plate.

This is correct.

Water flows into the

refrigerator.

The water outlet is clog-

ged.

Clean the water outlet.

Products prevent that wa-

ter flows into the water

collector.

Make sure that products

do not touch the rear

plate.

The temperature in

the appliance is too

low/high.

The temperature regula-

tor is not set correctly.

Set a higher/lower temper-

ature.

ENGLISH 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comments to this Manuals

No comments