AEG PE8036/60-M User Manual download pdf (Page 16)

8/23

will be exactly the one selected

and previously programmed.

• Take the filter-holder out of the

ring nut and remove the pod.

HOW TO PREPARE AN EXCELLENT

ESPRESSO

• To obtain an excellent espresso

cleaning and right temperature

are the most important elements.

• Make sure that filter, filter-holder

and ring nut are always well

cleaned.

• Except when the machine will not

be used for very long periods, it

should be kept on with the filter-

holder inserted into the ring nut to

keep it warm.

• Warm the cups filling them up

with a little bit of water by

pushing the coffee button. In that

way the water remained in the

boiler will come out and the filter-

holder will be warmed.

• After having made the last cup of

coffee, clean the filter-holder

making a coffee without beans in

order to remove all the remained

coffee grounds, that can change

the taste of the next coffees.

• To obtain an excellent espresso

the brewing time should be of

about 20- 25 seconds. Elements

that can influence the brewing

time are the grinding level of the

coffee, the ground coffee measure

and how much the coffee has

been pressed. The machine is set

to obtain a good-quality coffee. If

necessary, the grinding level can

be changed as well as the ground

coffee measure, (see chapter

4.How to behave during the first

process) in order to obtain the

excellent espresso.

• Useful advice: coffee is a

hygroscopical element that means

that its characteristics are strictly

connected with the weather

(humidity). Remember that the

coffee should be ground coarser

if there is a great quantity of

humidity in the air or it will

become thick and will come out

with difficulty; with a dry climate

on the contrary, the coffee should

be ground finer.

8. HOT WATER

• Put a container under the steam

pipe (A-2).

• Turn the steam knob counter-

clockwise (B-18).

• Push the hot water button (B-22)

and the delivered water measure

will be the same as previously

programmed.

• Close the steam knob (B-18)

9. STEAM

LIQUIDS ‘ HEATING

• Press once the steam button

(I/1); both the steam indicator

(B-29), and the water

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23

Comments to this Manuals

No comments