AEG "OKO-LAVAMAT 74760 Operations Instructions download pdf (Page 47)

Installation and connection instructions

Electrical connection

Details of the mains voltage, current

type and required fuses can be

found on the rating plate. The ra-

ting plate is located at the top

above the filling door.

For permanent electrical connection

within the electrical circuit, provi-

sions must be made which allow for electrical disconnection of the ap-

pliance from the mains with a contact opening of at least 3 mm at all

poles. Suitable devices include circuit breakers, fuses (threaded fuses

must be entirely removed from the socket), ground fault circuit inter-

rupters and contactors. Permanent connection may only be carried out

by an authorised electrician.

;

This appliance complies with the following EC directives:

– The "Low Voltage Directive" 72/23/EU with changes

– The "EMC Directive" 89/336/EU with changes

Water connection

The washing machine has safety features which prevent back-contami-

nation of the drinking water and which conform to the national regu-

lations of the water authorities (e.g. for Germany: DVGW guidelines).

This means that additional protective measures in the installation are

not necessary.

Important!

– Units for connecting to cold water must not be connected to hot wa-

ter.

– Use only new hose sets for the connection.

Permissible water pressure

The water pressure must be at least 1 bar (= 10 N/cm

= 0.1 Mpa), max-

imum 10 bar = 100 N/cm

= 1 Mpa).

• If more than 10 bar: Connect a pressure-reduction valve upstream.

• If less than 1 bar: Unscrew the inlet hose on the unit side at the sole-

noid intake valve and remove the flow regulator (to do this, remove

the filter with pointed pliers and take out the rubber washer behind).

Replace the filter.

Downloaded From WashingMachine-Manual.com Manuals

1 ... 46 47 48 ... 56

No comments

AEG "OKO-LAVAMAT 74760 Operations Instructions Page 47