AEG LP4481 User Manual download pdf (Page 27)

2. Place a suitable bowl below the drain

pump access to collect the water that

flows out.

3. Open the chute downwards. Always

keep a rag nearby to dry up any

water spillages when removing the

filter.

4. Turn the filter 180 degrees in anti-

clockwise direction to open it,

without removing. Let the water flow

out.

5. When the bowl is full of water, turn

the filter back and empty the

container.

6. Repeat the steps 4 and 5 until the

water stops to flow out.

7. Turn the filter anti-clockwise to

remove it.

8. If it is necessary, remove fluff and

objects from the filter recess.

9. Make sure that the impeller of the

pump can rotate. If it does not

rotate, contact the Authorised

Service Centre.

10. Clean the filter under the water tap.

11. Put the filter back into the special

guides by turning it clockwise. Make

sure that you tighten the filter

correctly to prevent leakages.

ENGLISH

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 75 76

No comments

AEG LP4481 User Manual Page 27