LAVAMAT 76800Washing MachineUser information
10Before the first washTo remove any production-related residues from the drum and water tank, perform the first wash cycle without washing. Programme
11Performing a wash cycleOpening the door/loading washing1. Open the door: pull the handle on the door.When the appliance is switched on, the DOOR and
12hardness range 1 (=soft). Your local water company will provide you with information about water hardness in your area.1. Pull out the detergent dra
13Switching on the appliance/selecting a programmeSet the programme and tempera-ture using the programme selector. 3 By selecting a programme, you are
14Selecting additional programmesIf required, press additional pro-gramme button(s). The correspond-ing indicator will illuminate. 3 If “Err” flashes
15Setting the delay timer3 Using the DELAY TIMER button you can delay the start of a programme by 30 minutes (30') to a maximum of 23 hours (23h)
16Interrupting a programme/adding washingInterrupting a programme• A programme can at any time be interrupted by pressing the START/PAUSE button and r
17Child safety deviceIf the child safety device has been activated, the door can no longer be shut.Activating the child safety device: Use a coin to t
18Cleaning and careImportant: Do not use furniture cleaning products or aggressive clean-ing agents to clean the appliance. Wipe over the control pane
19What to do if...Remedying small faults yourselfIf during use of the appliance one of the following error codes is shown in the multi-display:– E10 (
2Dear Customer,Please read this user information carefully and keep it to refer to later.Please pass the user information on to any future owner of th
20The washing machine vibrates when operating or is not stable.The transit packaging has not been removed.Remove the transit packag-ing.The screw feet
21If the wash result is not satisfactoryThe washing is grey and there are limescale deposits in the drum• Too little detergent was used.• An incorrect
22Carrying out an emergency drain1 Warning! Prior to carrying out an emergency drain, switch off the washing machine and remove the power plug from th
23Drain pumpThe drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pum
24Technical data5This appliance conforms with the following EU Directives:– 73/23/EEC dated 19.02.1973 Low Voltage Directive– 89/336/EEC dated 03.05.1
25Installation and connection instructions1 Safety information concerning installation• This washing machine cannot be built-in.• Before using for the
26Installing the applianceTransporting the appliance1 Warning: The washing machine is very heavy. There is a risk of injury. Exercise care when liftin
273 Special spanner A and sealing caps B (2 units) and C (1 unit) come with the appliance.3. Use special spanner A to remove screw D and the compressi
28If the appliance is to stand on a base: In order for the appliance to be se-cure on the base, fixing plates*) must be mounted, into which the appli
29Electrical ConnectionAny electrical work required to install this appliance should be carried out by a qualified electrician or competent person.1 W
3ContentsOperating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Safety . . . . . . . . . . . . . . . . . . .
30Permanent ConnectionIn the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electr
31Connecting the appliance to the water supplyImportant: • This appliance must not be connected to the hot water supply.• When connecting the applianc
32Water inflowA 1.35m long pressure hose is supplied with the appliance. If a longer inlet hose is required, only hoses from the manufacturer are to b
33Water drainageThe maximum permitted difference between the height of the surface on which the appliance is installed and the water outlet is 1 metre
34Warranty conditionsGreat BritainStandard guarantee conditionsWe, AEG, undertake that if within 12 months of the date of the purchase this AEG applia
35Service and Spare PartsIf the event of your appliance requiring service, or if you wish to pur-chase spare parts, please contact Service Force by te
From the Electrolux Group. The world´s No.1 choice.The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning an
4Installation and connection instructions. . . . . . . . . . . . . . . . . 25Safety information concerning installation . . . . . . . . . . . . . . .
5Operating Instructions1 SafetyPrior to using the appliance for the first time• Follow the “Installation and connection instructions”.• If the applian
6• Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug from the power point or – if t
7Description of the applianceControl panel Detergent drawerScrew feet(height adjustable)Plinth flap/Drain pumpRating plate(behind door)Control panelDE
8Programme overviewProgrammemax. load 1) (dry washing) 1) A 10 litre bucket contains approx. 2.5 kg dry washing (cotton)Additional programmes Spin spe
9Application/FeaturesCare sym-bols1) 1) The figures in the care symbols indicate the maximum temperatures.Energy-saving programme which washes at 60 °
Comments to this Manuals