AEG L87695WD User Manual download pdf (Page 22)

9.10 Cancelling the delay start

To cancel the delay start:

1. Press button Start/Pauze - Départ/

Pause to set the appliance to pause.

The related indicator flashes.

2. Press button Startuitstel - Départ

Différé repeatedly until the display

shows .

3. Press button Start/Pauze - Départ/

Pause again to start the programme

immediately.

9.11 Interrupting a

programme and changing a

function

You can change only some options

before they operate.

1. Press button Start/Pauze - Départ/

Pause.

The related indicator flashes.

2. Change the function set.

3. Press the button Start/Pauze -

Départ/Pause again.

The programme continues.

9.12 Cancelling a running

programme

1. Press button Aan/Uit - Marche/Arrêt

to cancel the programme and to

deactivate the appliance.

2. Press button Aan/Uit - Marche/Arrêt

again to activate the appliance.

Now, you can set a new washing

programme.

Before starting the new

programme the appliance

could drain the water. In this

case, make sure that the

detergent is still in the

detergent compartment, if

not fill the detergent again.

9.13 Opening the door

If the temperature and level

of the water in the drum are

too high and the drum still

rotates you cannot open the

door.

While a programme or the delay start

operates, the appliance door is locked.

1. Press button Start/Pauze - Départ/

Pause.

In the display the related door lock

indicator goes off.

2. Open the appliance door.

3. Close the door and press button

Start/Pauze - Départ/Pause.

The programme or the delay start

continues.

9.14 End of cycle

When the programme has finished, the

appliance stops automatically. The

acoustic signal operates (if it is active).

In the display comes on and the door

locked indicator goes off.

The indicator of Start/Pauze - Départ/

Pause button goes off.

1. Press button Aan/Uit - Marche/Arrêt

to deactivate the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

show the end of the last set

programme. Turn the

programme knob to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door ajar, to prevent

mildew and odours

9.15 Draining water out after

end of cycle

The washing programme is completed,

but there is water in the drum:

The drum turns regularly to prevent the

creases in the laundry.

The door lock indicator is on. The

door stays locked.

www.aeg.com

22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 75 76

Comments to this Manuals

No comments