AEG L7WE7631BI User Manual download pdf (Page 12)

3. Connect the hose to the back of the

appliance. Do not turn the inlet hose

downwards, but turn it left or right depending

on the position of your water tap.

4. Loosen the ring nut to fix it in the correct

position.

5. Connect the water inlet hose to the cold

water tap with 3/4 thread.

WARNING!

Make sure that there are no

leaks from the couplings.

Use the hose supplied with appliance.

Do not use an extension hose if the inlet hose is too short. Contact the

Authorised Service Centre for an inlet hose replacement.

Water drainage

The drain hose can be connected:

Ø 40 mm

To a stand pipe with vent-hole

Directly into a drain pipe at a height of not

less than 60 cm (23.6”) and not more than 100

cm (39.3”).

The end of the drain hose must always be

ventilated , i.e. the inner diameter of the drain

pipe (min. 40 mm - min. 1.6”) must be larger

than the external diameter of the drain hose.

www.aeg.com12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

No comments

AEG L7WE7631BI User Manual Page 12