AEG L7FEC146 User Manual download pdf (Page 26)

In the display the related door lock

indicator goes off.

2. Open the appliance door. If

necessary, add or remove the items.

3. Close the door and touch the button

Avvio/Pausa.

The programme or the delay start

continues.

4. The door can be opened when the

programme is complete, or set Spin

Drain programme/option and than

press Avvio/Pausa button.

10.13 End of the programme

When the programme has finished, the

appliance stops automatically. The

acoustic signals operate (if they are

active).

In the display all washing phase

indicators become steady and the time

area shows .

The indicator of the Avvio/Pausa button

goes off.

The door unlocks and the indicator

goes off.

1. Press the On/Off button to

deactivate the appliance.

After five minutes from the end of the

programme, the energy saving function

automatically deactivates the appliance.

When you activate the

appliance again, the display

show the end of the last

selected programme. Turn

the programme dial to set a

new cycle.

2. Remove the laundry from the

appliance.

3. Make sure that the drum is empty.

4. Keep the door and the detergent

dispenser slightly ajar to prevent

mildew and odours.

5. Close the water tap.

10.14 Draining water out after

end of cycle

If you have chosen a programme or an

option that does not empty out the

water of the last rinse, the programme is

completed, but:

• The display shows the indicator , the

option indicator or and the

door locked indicator . The

indicator of the running phase

flashes.

• The drum still turns at regular intervals

to prevent the creases in the laundry.

• The door stays locked.

• You must drain the water to open the

door:

1. If necessary, touch the Giri/Min.

button to decrease the spin speed

proposed by the appliance.

2. Touch the Avvio/Pausa button:

• If you have set

, the appliance

drains the water and spins.

• If you have set , the appliance

only drains the water.

The option indicator

or goes out,

while the indicator flashes and then

goes off.

3. When the programme is completed

and the door locked indicator

goes off, you can open the door.

4. Press the On/Off button a few

seconds to deactivate the appliance.

In any case, the appliance

empties the water out

automatically after

approximately 18 hours.

10.15 Stand-by option

The Stand-by function automatically

deactivates the appliance to decrease

the energy consumption when:

• You do not use the appliance for 5

minutes before you touch the Avvio/

Pausa button.

Press the button On/Off to activate

the appliance again.

• After 5 minutes from the end of the

washing programme

Press the On/Off button to activate

the appliance again.

The display shows the end of the last

set programme.

Turn the programme dial to set a new

cycle.

www.aeg.com

26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

Comments to this Manuals

No comments