AEG L7FC8432BI User Manual download pdf (Page 10)

The inlet hose

1. Remove the inlet hose from inside the

drum.

2. To connect the water inlet hose towards

the proper direction and with the proper

inclination, check the position of the water

tap before connecting it to the back of the

appliance.

Make sure the hose is nor

kinked, squashed but neither

tensed.

3. Connect the hose to the back of the

appliance. Do not turn the inlet hose

downwards, but turn it left or right depending

on the position of your water tap.

4. Loosen the ring nut to fix it in the correct

position.

5. Connect the water inlet hose to the cold

water tap with 3/4 thread.

WARNING!

Make sure that there are no

leaks from the couplings.

Use the hose supplied with appliance.

Do not use an extension hose if the inlet hose is too short. Contact the

Authorised Service Centre for an inlet hose replacement.

Water drainage

The drain hose can be connected:

www.aeg.com10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

No comments

AEG L7FC8432BI User Manual Page 10