AEG L60270FL User Manual download pdf (Page 16)

2.

Turn again the programme knob to

a new washing programme. At this

time you can also set the available

functions.

The appliance does not drain the

water.

9.6 Change a function

You can change only some functions be-

fore they operate.

1.

Press button

4

. The indicator

flashes.

2.

Change the function set.

9.7 Set the delay start

1.

Press button

5

again and again un-

til the display shows the number of

minutes or hours. The related sym-

bols comes on.

2.

Press button

4

, the appliance

starts the countdown of the delay

start.

When the countdown is completed,

the programme starts automatically.

Before you press button

4

to

start the appliance, you can can-

cel or change the set of the delay

start.

9.8 Cancel the delay start

1.

Press button

4

. The related indica-

tor flashes.

2.

Press button

5

again and again un-

til the display shows 0’.

3.

Press button

4

. The programme

starts.

9.9 Open the door

While a programme or the delay start

operates, the appliance door is locked.

To open the appliance door:

1.

Press button

4

. The door lock

symbol in the display goes off.

2.

Open the appliance door.

3.

Close the appliance door and press

button

4

. The programme or the

delay start continues.

If the temperature and level of

the water in the drum are too

high, the door lock symbol stays

on and you cannot open the

door. To open the door do the

steps that follow:

1.

Deactivate the appliance.

2.

Wait for some minutes.

3.

Make sure that no water is in

the drum.

If you deactivate the appliance, it

is necessary to set the pro-

gramme again.

9.10 At the end of the

programme

• The appliance stops automatically.

• The acoustic signals operate.

•

In the display

comes on.

• The indicator of the Start/Pause but-

ton

4

goes off.

• The door lock symbol goes off.

•

Press button

1

to deactivate the ap-

pliance. After five minutes from the

end of the programme, the energy

saving function automatically deacti-

vates the appliance.

When you activate the appliance

again, the display show the end

of the last set programme. Turn

the programme knob to set a

new cycle.

• Remove the laundry from the appli-

ance. Make sure that the drum is emp-

ty.

• Keep the door ajar, to prevent mildew

and odours.

• Close the water tap.

The washing programme is

completed, but there is water in the

drum:

– The drum turns regularly to prevent

the creases in the laundry.

– The door stays locked.

– You must drain the water to open the

door.

To drain the water:

1.

If necessary, decrease the spin

speed.

16

www.aeg.com

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comments to this Manuals

No comments