AEG L 60260 TL User Manual download pdf (Page 14)

SETTING AND STARTING A PROGRAMME

1.

Turn the programme knob.

2.

The indicator of button

4

flashes

with red colour.

3.

The indicators of the default tempera-

ture and spin speed come on. To

change the temperature and/or the

spin speed, press the related buttons.

4.

Set the available functions and the

delay start. When you press the rele-

vant button, the indicator of the set

function comes on or the display

shows the related symbol.

5.

Press button

4

to start the pro-

gramme. The indicator of button

4

is on with red colour.

INTERRUPT A PROGRAMME

1.

Press button

4

. The indicator flash-

es.

2.

Press button

4

again. The washing

programme continues.

CANCEL A PROGRAMME

1.

Press button

1

to cancel the pro-

gramme and to deactivate the appli-

ance.

2.

Press button

1

again to activate the

appliance. Now, you can set a new

washing programme.

The appliance does not drain the

water.

CHANGE A FUNCTION

You can change only some functions be-

fore they operate.

1.

Press button

4

. The indicator flash-

es.

2.

Change the function set.

SET THE DELAY START

1.

Press button

5

again and again until

the display shows the number of mi-

nutes or hours.

2.

Press button

4

, the appliance starts

the countdown of the delay start.

When the countdown is completed,

the programme starts automatically.

Before you press button

4

to

start the appliance, you can cancel

or change the set of the delay

start.

You cannot set the delay start with

the Steam programme.

CANCEL THE DELAY START

1.

Press button

4

. The related indica-

tor flashes.

2.

Press button

5

again and again until

the display shows 0’.

3.

Press button

4

. The programme

starts.

OPEN THE LID

While a programme or the delay start op-

erates, the lid is locked.

To open the lid:

1.

Press button

4

. You can open the

lid 2 minutes after the appliance

stops. The door lock symbol in the

display goes off.

2.

Open the lid.

3.

Close the lid and press button

4

.

The programme or the delay start

continues.

If the temperature and level of the

water in the drum are too high,

the door lock symbol stays on and

you cannot open the lid . If neces-

sary, do the following procedure

to open the lid.

1.

Deactivate the appliance.

2.

Wait for some minutes.

3.

Make sure that there is no wa-

ter in the drum.

If you deactivate the appliance, it

is necessary to set the programme

again.

14

www.aeg.com

1 ... 13 14 15 ... 32

Comments to this Manuals

No comments