Aeg L99695HWD User Manual

L 87695 WD EN User manual

EThe steam symbol comes on when you set a Steamprogramme.FThe anti-crease symbol comes on when you set a dry-ing programme.GYou cannot open the applia

MThe detergent overdosing symbol comes on at theend of the cycle when the appliance detects too muchdetergent.Graphic barsThe empty indicator bar appe

5.8 Time save button 8Press button 8 to decrease the durationof the programme.– Press one time to set 'Shortened dura-tion' for items with d

5.15 Permanent extra rinsefunctionWith this function you can keep the extrarinse function permanently on when youset a new programme.•To activate the

ProgrammeTemperatureType of loadMax. weight of loadCycle de-scriptionFunctions20 Min. - 3 kg40° - 30°Quick wash of sport itemsor cotton and synthetici

ProgrammeTemperatureType of loadMax. weight of loadCycle de-scriptionFunctionsEconomy8)60° - 40°White and fast colouredcotton with normal soil.Set thi

6.1 Woolmark CertificateThe wool wash of this machine has been tes-ted and approved by The Woolmark Compa-ny for the washing of wool containing gar-me

6.3 Programmes for timed dryingDegree of drying Type of fabricLoad(Kg)Spinspeed(rpm)Sugges-ted times(mins)Extra dryFor towelling mate-rialsCotton and

Programme Energy con-sumption(KWh)Water con-sumption(litres)Programmeduration(minutes)Cottons 60° 1.60 69For the du-ration of thepro-grammes,please re

Make sure that no laundry stays betweenthe seal and the door. There is a risk ofwater leakage or damage to the laundry.9.2 Filling the detergent and a

CONTENTS1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. SAFETY

Check the position of the flap1.Pull out the detergent dispenser un-til it stops.2.Press the lever down to remove thedispenser.3.To use powder deterge

6.Press button 6 to start the pro-gramme. The indicator of button 6is on.The drain pump can operate fora short time when the appliancefills water.The

• The door lock symbol goes off.•Press button 1 to deactivate the ap-pliance. After five minutes from theend of the programme, the energysaving functi

The drying symbol starts toflash.The symbol of the set levelstays on.The other level symbols gooff.You cannot set all levels for allkind of laundry.Wi

CAUTION!Do not set a spin speed lowerthan the automatic speed ofthe set programme.• Set the available options.•Press the button 8 until the blackline

• When the programme is completed,the appliance stops automatically.• The acoustic signals operate.•When the door locked symbol goes off, you can open

• Do not mix different types of deter-gents.• To help the environment, do not usemore than the correct quantity of de-tergent.• Obey the instructions

– Fabrics with residue of hair sprays, nailsolvents or similar.– Garments with foam-rubber or materi-als similar to foam-rubber.12.7 Garment labelsWhe

13.4 Door sealRegularly examine the seal and removeall objects from the inner part.13.5 DrumRegularly examine the drum to preventlimescale and rust pa

13.7 Drain pumpRegularly examine the drainpump and make sure that it isclean.Clean the pump if:• The appliance does not drain the wa-ter.• The drum ca

1. SAFETY INFORMATIONBefore the installation and use of the appliance, careful-ly read the supplied instructions. The manufacturer isnot responsible i

7.Remove fluff and objects from thepump.8.Make sure that the impeller of thepump can turn. If this does not oc-cur, contact the service centre.129.Cle

4.Remove the inlet hose behind theappliance.5.Clean the filter in the valve with astiff brush or a towel.45°20°6.Install again the inlet hose. Makesur

• - The appliance does not drainthe water.• - The appliance door is open ornot closed correctly.• - The anti-flood device is on.WARNING!Deactivate the

Problem Possible cause Possible solution The filter of the drainpump is blocked.Clean the filter of the drainpump. Refer to 'Care and clean-ing&

Problem Possible cause Possible solution You did not remove thestubborn stains beforeyou wash the laundry.Use special products to removethe stubborn

15.2 Unpacking1.Use the gloves. Remove the externalfilm. If necessary, use a cutter.2.Remove the cardboard top.3.Remove the polystyrene packagingmater

6.Put one of the polystyrene packag-ing elements on the floor behindthe appliance. Carefully put downthe appliance with the rear side onit. Make sure

12.Put the plastic caps in the holes.You can find these caps in the usermanual bag.WARNING!Remove all the packaging andthe transit bolts before you in

Installation on suspendedflooringSuspended wooden floors are particular-ly susceptible to vibration. To help pre-vent vibration we recommend you place

Water-stop deviceAThe inlet hose has a water stop device.This device prevents water leaks in thehose because of its natural ageing. Thered sector in t

• If the supply cord is damaged, it must be replaced bythe manufacturer, its service agent or similarly quali-fied persons in order to avoid a hazard.

• If the end of the drain hose is this (seethe drawing), you can push it directlyinto the stand pipe.Without the plastic hose guide.• To a sink spigot

15.6 In the interest of the environment• Connect the appliance to the FOULsystem for the drain water. The sew-age works keeps the drain water forthe t

42www.aeg.com

ENGLISH 43

www.aeg.com/shop132926262-B-202013

Water connection• Make sure not to cause damage to thewater hoses.• The appliance is to be connected tothe water mains using the new sup-plied hose-se

• Disconnect the appliance from themains supply.• Cut off the mains cable and discard it.• Remove the door catch to preventchildren and pets to get cl

4. PRODUCT DESCRIPTION1 2 3 8956741011121Worktop2Detergent dispenser3Control panel4Door handle5Rating plate6Drain pump7Feet for the appliance level8Wa

4.2 Accessories1 2341SpannerTo remove the transit bolts.2Plastic capsTo close the holes on the rear sideof the cabinet after the removal ofthe transit

• After 5 minutes from the end of thewashing programme. Refer to 'At theend of programme'.5.2 Programme knob 2Turn this knob to set a progra