LAVAMAT 61271 BILAVAMAT 61470 BIEN WASHING MACHINE USER MANUAL
4 and 5 until the symbol comes on ordisappears from the display.10www.aeg.com
WASHING PROGRAMMESProgrammeMaximum and Minimum TemperatureType of LaundryMaximum LoadCycle De-scriptionOptionsCottons95° - ColdMax. load 7 kg - Reduce
ProgrammeMaximum and Minimum TemperatureType of LaundryMaximum LoadCycle De-scriptionOptionsSpinMax. load 7 kgSeparate spin for hand washed cotton gar
ProgrammeMaximum and Minimum TemperatureType of LaundryMaximum LoadCycle De-scriptionOptionsEconomy40°Max. load 7 kgFast coloured cotton.Slightly soil
FIRST USE1.To activate the drain system, put 2 li-tre of water in the main wash com-partment of the detergent dispenser.2.Put a small quantity of dete
This is the maximum level for the quantity of liquid additives.Always obey the instructions that you find on the packaging of the deter-gent products.
The appliance will perform some addi-tional rinses.SETTING PERMANENTLY THEEXTRA RINSE OPTIONIf you wish to activate this option perma-nently press sim
ALTERING AN OPTION OR ARUNNING PROGRAMMEIt is possible to change some options be-fore the programme carries it out. Beforeyou make any change, you mus
HELPFUL HINTS AND TIPSTHE LAUNDRY LOAD• Divide the laundry in: white, coloured,synthetics, delicates and wool.• Obey the washing instructions that are
Level TypeWater hardness°dH °T.H. mmol/l Clarke2 medium 8-14 16-25 1.6-2.5 10-163 hard 15-21 26-37 2.6-3.7 17-254 very hard > 21 > 37 >3.7 &g
CONTENTS4 SAFETY INFORMATION5 TECHNICAL INFORMATION7 PRODUCT DESCRIPTION8 CONTROL PANEL11 WASHING PROGRAMMES14 FIRST USE14 DAILY USE15 SETTING AND STA
CARE AND CLEANINGWARNING!Disconnect the appliance from the mainssupply before you clean it.DESCALINGThe water we use contains limescale. If itbecomes
MAX3.Remove the top part of the liquid ad-ditive compartment.4.Clean all the parts with water.5.Clean the dispenser recess with abrush.6.Put back the
5.When no more water comes out, un-screw the pump cover (A) by turningit anti-clockwise and remove the fil-ter. Use pliers, if necessary.Always keep a
To clean the water inlet filters:1.Close the water tap.2.Remove the water inlet hose from thewater tap.3.Clean the filter in the inlet hose with astif
TROUBLESHOOTINGCertain problems are due to lack of sim-ple maintenance or oversights, which canbe solved easily without calling out an en-gineer. Befo
Problem Possible cause/SolutionThe machine does notempty and/or does notspin:The drain hose is squashed or kinked. • Check the drain hose connection.T
Problem Possible cause/SolutionThe machine vibrates oris noisy:The transit bolts and packing have not been removed.• Check the correct installation of
INSTALLATIONUNPACKING1.Use the gloves. Remove the externalfilm. If necessary, use a cutter.2.Remove the cardboard top.3.Remove the polystyrene packagi
6.Put one of the polystyrene packagingelements on the floor behind the ap-pliance. Carefully put down the appli-ance with the rear side on it. Makesur
12.Put the plastic caps in the holes. Youcan find these caps in the user man-ual bag.WARNING!Remove all the packaging and thetransit bolts before you
FOR PERFECT RESULTSThank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative techn
THE INLET HOSE20O20O20O45O45O45O• Connect the hose to the appliance.Turn the inlet hose only left or right.Loose the ring nut to set it in the cor-rec
With the plastic hose guide. • On the edge of a sink.• Make sure that the plastic guide cannotmove when the appliance drains. At-tach the guide to the
Without the plastic hose guide.• To a sink spigot.Refer to the illustration. Put the drainhose in the spigot and tighten it with aclip. Make sure that
BUILDING INOVERVIEW600 mm555 mm596 mm170 mm75 mm100 mm60 mmmin.820 mmmin.560 mm818 mm• This appliance has been designed tobe built into the kitchen fu
12• HingesTo mount the hinges it is necessary todrill two holes (dia. 35 mm, depth12.5-14 mm depending on the depth ofdoor furniture) on the inner sid
Fig. 7ENGLISH35
www.aeg.com/shop 132927080-A-022012
SAFETY INFORMATIONBefore the installation and use, read thismanual carefully:• For your safety and the safety of yourproperty• To help the environmen
• Do not install and connect a damagedappliance.• Make sure to remove all packaging andtransport bolts.• Make sure that the mains plug is dis-connecte
Electrical connection: VoltageOverall powerFuseFrequency230-240 V2050 W13 A50 HzLevel of protection against ingress of solid particlesand moisture ens
PRODUCT DESCRIPTION7 8 9101 234561Detergent dispenser2Control panel3Door handle4Rating plate5Drain pump6Feet for the appliance level7Water drain hose8
CONTROL PANEL1 2 3 4 5 6 7 98 10ABC1Programme selector dial2TEMPERATURE button3SPIN button•Rinse hold position 4STAIN button5EXTRA RINSE button6TIME S
End of programmeWhen the programme has finished, the display shows a blinkingzero .The DOOR light B, the WASHING light A and the light of button 8go
Comments to this Manuals