AEG KD92903E User Manual download pdf (Page 13)

Cleaning and maintenance

CLEANING AND MAINTENANCE

Cleaning is the only maintenance action that is required normally.

Warning! Cleaning must be done with the crockery warmer disconnected from the

electrical power supply. Remove the plug from the power socket or disconnect the

crockery warmer power supply circuit.

Do not use aggressive or abrasive cleaning products, abrasive sponges or pointed

objects since stains or abrasion marks may appear.

Do not use high pressure or steam jet cleaning appliances.

Appliance front and control panel

The crockery warmer can be cleaned using just a damp cloth. If it is very dirty, add a

few drops of washing-up liquid to the washing water.

Wipe the surfaces dry using a dry cloth.

For stainless steel fronted crockery warmers, special products for treatment of

stainless steel surfaces can be used. These products prevent the surfaces becoming

dirty again for some time. Apply a thin layer of such a product on the surface using

a soft cloth.

On aluminium fronted crockery warmers use a gentle glass cleaning product and a

soft cloth that does not release fluff. Wipe horizontally without pressing on the

surface since aluminium is sensitive to scratches and cuts.

Interior of the crockery warmer

Clean the inside of the crockery warmer regularly using a damp cloth. If it is very

dirty add a few drops of washing-up liquid to the washing water.

Wipe the surfaces dry using a dry cloth.

Avoid water entering through the air circulation opening.

Only use the crockery warmer again when it is completely dry.

Mat with non-slip surface

The non-slip surface mat can be removed to facilitate cleaning of the drawer.

The mat can be cleaned by hand using hot water with a few drops of washing-up

liquid. Dry thoroughly.

The non-slip mat should only be replaced when it is completely dry.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 58 59

No comments

AEG KD92903E User Manual Page 13