Aeg TC120 User Manual download pdf (Page 4)

4

Making the Vacuum Cleaner Ready

for Use

Connect suction hose and suction tube

together until the catch engages

Firmly connect the suction hose handle to the

suction tube.

Adjust Telescopic Tube

(depending on model)

The tube can be adjusted to the required work-

ing height by sliding the sleeve.

Connect Suction Hose

(depending on model)

Insert the connector on the suction hose in the

suction inlet. The connector locks in place and

can be rotated freely (depending on model).

To remove the hose, press the release button and

pull out the connector.

Mains Connection/Cable Rewind

The mains cable is in the cable compartment.

Pull out the cable and plug into a mains socket.

After use, unplug from the mains. Press the foot

button, the cable is rolled up automatically.

Switching On

Switch On and Off

You can switch the appliance on and off

by pressing the On/Off button. When

switched on, the mains power indicator

is illuminated (depending on model).

Adjusting the Suction Power

(depending on model)

The suction power can be adjusted to suit the

specific situation using the electronic power

regulation. By reducing the suction power, you

can significantly reduce the amount of force

needed to push the nozzle.

On the Appliance

949126ts.book Seite 4 Dienstag, 12. Dezember 2000 11:01 11

1 2 3 4 5 6 7 8 9 ... 49 50

Comments to this Manuals

No comments