AEG S1643-6TK User Manual download pdf (Page 18)

57

Malfunction

The food is too warm.

Possible Cause

Carefully warm the leaking

sections of the door seal

with a hair dryer (not hot-

ter than approx. 50 °C).

At the same time shape the

warmed door seal by hand

such that it sits correctly.

Door seal is not air tight

(possibly after changing

over the hinges).

Heavy build up of frost,

possibly also on the door

seal.

Remedy

Temperature is not properly

adjusted.

Please look in the "Initial

Start Up" section.

Door was open for an

extended period.

Open the door only as long

as necessary.

A large quantity of warm

food was placed in the

appliance within the last

24 hours.

Turn the temperature regu-

lator to a colder setting

temporarily.

The appliance is near a

heat source.

Please look in the

"Installation location"sec-

tion.

Light bulb is defective.

Please look in the

"Changing the Light Bulb”.

Interior lighting does not

work.

Unusual noises.

Appliance is not level.

The appliance is touching

the wall or other objects.

A component, e.g. a pipe,

on the rear of the applian-

ce is touching another part

of the appliance or the

wall.

Readjust the feet.

Move the appliance slight-

ly.

If necessary, carefully bend

the component out of the

way.

Water on the floor or on

storage shelves.

Water drain hole is

blocked.

See the "Cleaning and

Care" section.

This is normal, no error has

occurred.

The compressor starts after

a period of time.

The compressor does not

start immediately after

changing the temperature

setting.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25

Comments to this Manuals

No comments