AEG Protect Home. 600 VA Operations Instructions download pdf (Page 7)

The output may be live, even if the UPS is not

connected to the mains supply, as the UPS has

its own internal power supply (battery)!

For health and safety reasons, the unit must be

earthed correctly!

PROTECT HOME. may only be operated with or connected to

a 230 VAC mains with protective grounding using a mains

connection cable with PE conductor (included in the delivery) that

has been tested in accordance with German standards (VDE).

Danger! Risk of burning!

The battery has powerful short-circuit currents.

Incorrect connection or isolation faults can lead to

melting of the plug connections, sparking potential

and severe burns!

The unit has a warning signal that sounds when

the battery voltage of PROTECT HOME. is

exhausted or when the UPS is not working in its

normal mode.

Observe the following safety instructions to

ensure permanent operational safety of and

safe work with the UPS:

♦ Do not dismantle the UPS!

(The UPS does not contain any parts which require

regular maintenance. Bear in mind that the warranty

will be invalidated if the unit is opened!)

♦ Do not install the unit in direct sunshine or in close

proximity of heaters!

♦ The unit is designed to be installed inside in heated

rooms. Never install the UPS in the vicinity of water or

in an excessively damp environment!

♦ Condensation may occur if the UPS is brought from a

cold environment into the room where it is to be

installed. The UPS must be absolutely dry prior to start-

up. As a result, leave it to acclimatise for at least two

hours.

♦ Never connect the mains input to the UPS output!

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

No comments

AEG Protect Home. 600 VA Operations Instructions Page 7