AEG LTH8080WP User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
What to do if ...
31
If you do not find the required information in this manual to remedy a
disturbance, please call the customer service.
Replacing the interior light
0 A replacement bulb can be purchased through your local AEG Service
Force Centre (Part No: 647072580).
1
Warning! Never use standard light bulbs in your Lavatherm.
0 Isolate the appliance from the mains supply.
0 Screw-off the bulb cover. (The bulb is located at the top behind the
door; see Front view).
0 Replace the defective bulb.
0 Screw-on the bulb cover.
1
Warning! For safety reasons the bulb cover must be screwed-on. The
dryer must not be operated, without the cover in place.
The dryer terminates the
drying process automatically:
END (ENDE) is displayed
shortly after program start;
no display of the extent of
drying
Too dry or too little
laundry filled-in for the
selected program
Select time program or
higher drying stage (e.g.
EXTRA DRY (EXTRATRO-
CKEN) instead of
CUPBOARD DRY
(SCHRANKTROCKEN)
The drying process takes
unusually long. 4.5 hours
after the beginning of the
drying process:
- END (ENDE) display is illumi-
nated
- acoustic signal sounds
- discontinuation of the
drying process
- drying degree indicator and
program run display are
flashing
- error code C6 is displayed
Fluff filter is blocked Clean the fluff filter
Too much laundry
filled-in
Reduce the amount of
laundry filled-in
Fluff sieve is blocked Clean the fluff sieve
Laundry too damp
Pre-dry the laundry more
thoroughly
Symptom Possible cause Solution
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Comments to this Manuals

No comments