Aeg Eclipse 10 User Manual download pdf (Page 5)

6. INSTALLING YOUR PHONE

6.1 Connecting the Base Station (See P4)

tPlug the mains power cable (15) and telephone line cord (16) into the base station.

tPlug the power adapter into a 100 - 240Vac, 50 - 60Hz mains power socket and the telephone line cord

into a telephone line socket.

Warning: Always use the cables provided in the box. Use only the supplied adaptor. Using other power

adapter may damage the unit.

Note: Place the base unit within easy reach of the mains power socket. Never try to lengthen the mains

power cable. The base station needs mains power for normal operation and the cordless handsets will

not work without it.

6.2 Installing and Charging the Rechargeable Batteries

tInsert the 2 supplied batteries into the battery compartment, observing the correct polarity (see markings

inside battery compartment).

Warning: Use only the supplied NiMH rechargeable batteries.

tPlace the back cover over the back of the handset and press down until it clicks into place.

tPlace the handset on the base and charge for 15 hours before using the handset for the ﬁrst time.

>The handset will give a double beep when it is properly placed on the base and the battery charging

indicator on the base lights up to indicate charging.

Note: The handset may become warm when the batteries are being charged or during prolonged periods

of use. This is normal and does not indicate a fault.

CAUTION

Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to

the instructions.

6.3 Removing the back cover of the Eclipse Handset (See P5)

Insert the supplied key into the groove as indicated in the illustration and twist it clockwise to release the

back cover.

1 2 3 4 5 6 ... 34

No comments

Aeg Eclipse 10 User Manual Page 5