Aeg HK955070XB User Manual download pdf (Page 22)

• The relation between heat setting and

times of the Automatic Switch Off

function:

•

, - — 6 hours

•

- — 5 hours

•

- — 4 hours

•

- — 1.5 hours

4.3 The heat setting

Touch the control bar at the heat set-

ting. Move your finger along the control

bar to change the setting. Do not re-

lease before you have a correct heat set-

ting. The display shows the heat setting.

4.4 Activation and

deactivation of the outer rings

You can adjust the surface you cook to

the dimension of the cookware.

To activate the outer ring touch the sen-

sor field

/ . The indicator comes

on. For more outer rings touch the same

sensor field again. The subsequent indi-

cator comes on.

Do the procedure again to deactivate

the outer ring. The indicator goes out.

4.5 Automatic Heat Up

You can get a necessary heat setting in a

shorter time if you activate the Automat-

ic Heat Up function. This function sets

the highest heat setting for some time

(see the diagram), and then decreases to

the necessary heat setting.

To start the Automatic Heat Up function

for a cooking zone:

1.

Touch ( comes on in the dis-

play).

2.

Immediately touch the necessary

heat setting. After 3 seconds

comes on in the display.

To stop the function change the heat

setting.

1

2

3

4

5

6

7

8

9

10

11

12

0

1 2 3 4 5 6 7 8 9 101112 1314

4.6 Timer

Count Down Timer

Use the Count Down Timer to set how

long the cooking zone operates for only

this one time.

Set the Count Down Timer after the

selection of the cooking zone.

You can set the heat setting before or af-

ter you set the timer.

•

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

• To activate the Count Down Timer:

touch

of the timer to set the time (

00

-

99

minutes). When the indicator

of the cooking zone start to flash slow,

the time counts down.

• To see the remaining time: set the

cooking zone with

. The indicator

of the cooking zone starts to flash

quickly. The display shows the remain-

ing time.

• To change the Count Down Timer:

set the cooking zone with

. Touch

or .

• To deactivate the timer: set the

cooking zone with

. Touch . The

remaining time counts back to

00

.

The indicator of the cooking zone

goes out. To deactivate you can also

touch

and at the same time.

When the countdown comes to an

end, the sound operates and

00

flash-

es. The cooking zone deactivates.

•

To stop the sound: touch

22

www.aeg.com

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comments to this Manuals

No comments