AEG SCE81826TC User Manual download pdf (Page 15)

Problem Possible cause Solution

The door is not closed cor-

rectly.

Refer to "Closing the door".

The "FROSTMATIC" or

"COOLMATIC" is switch-

ed on.

Refer to "FROSTMATIC func-

tion" or "COOLMATIC func-

tion".

The compressor does not

start immediately after

pressing the "FROSTMAT-

IC" or "COOLMATIC", or af-

ter changing the tempera-

ture.

This is normal, no error has

occurred.

The compressor starts after a

period of time.

Water flows inside the refrig-

erator.

Food products prevent the

water to flow into the wa-

ter collector.

Make sure that food products

do not touch the rear plate.

The water outlet is clog-

ged.

Clean the water outlet.

Water flows on the floor. The melting water outlet is

not connected to the

evaporative tray above the

compressor.

Attach the melting water out-

let to the evaporative tray.

Temperature cannot be set. The "FROSTMATIC func-

tion" or "COOLMATIC

function" is switched on.

Switch off "FROSTMATIC

function" or "COOLMATIC

function" manually, or wait un-

til the function resets automat-

ically to set the temperature.

Refer to "FROSTMATIC func-

tion" or "COOLMATIC func-

tion".

dEMo appears on the dis-

play.

The appliance is in demon-

stration mode.

Keep the OK pressed for ap-

proximately 10 seconds until a

long sound is heard and dis-

play shuts off for a short time.

The temperature in the ap-

pliance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera-

ture.

The door is not closed cor-

rectly.

Refer to "Closing the door".

The food products' tem-

perature is too high.

Let the food products temper-

ature decrease to room tem-

perature before storage.

Many food products are

stored at the same time.

Store less food products at the

same time.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comments to this Manuals

No comments