AEG S53520CTW2 User Manual download pdf (Page 16)

As the colours of the wires in the mains

lead of this appliance may not

correspond with the coloured markings

identifying the terminals in your plug,

proceed as follows:

1. Connect the wire coloured green and

yellow to the terminal marked either

with the letter “E“ or by the earth

symbol or coloured green and

yellow.

2. Connect the wire coloured blue to

the terminal either marked with the

letter “N“ or coloured black.

3. Connect the wire coloured brown to

the terminal either marked with the

“L“ or coloured red.

4. Check that no cut, or stray strands of

wire is present and the cord clamp

(E) is secure over the outer sheath.

Make sure the electricity supply voltage

is the same as that indicated on the

appliance rating plate.

5. Switch on the appliance.

The appliance is supplied with a 13 amp

fuse (B). In the event of having to change

the fuse in the plug supplied, a 13 amp

ASTA approved (BS 1362) fuse must be

used.

WARNING!

A cut off plug inserted into a

13 amp socket is a serious

safety (shock) hazard. Ensure

that it is disposed of safely.

9.4 Rear spacers

You can find the two spacers in the bag

with documentation.

1. Release the screw.

2. Engage the spacer below the screw.

3. Turn the spacer to the right position.

4. Tighten again the screws.

2

4

3

1

9.5 Levelling

When placing the appliance ensure that

it stands level. This can be achieved by

two adjustable feet at the bottom in

front.

9.6 Door reversibility

WARNING!

Before carrying out any

operations, remove the plug

from the power socket.

CAUTION!

To carry out the following

operations, we suggest that

this be made with another

person that will keep a firm

hold on the doors of the

appliance during the

operations.

1. Open the door and empty the

shelves.

2. Unscrew the screws of the upper

hinge (1).

2

1

www.aeg.com

16

1 2 ... 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments