Aeg 155 D User Manual download pdf (Page 17)

2. The activated carbon filter should under absolutely no circum

stances ever be washed. To remove it, press the two red

buttons B and pull it down and out (Fig. 14).

3. Clean the Inner housing using a hot detergent solution only

(never use caustic detergents, abrasive powders or brushes).

4. Fit the new activated carbon filter in its special frame. Inserting

the back end first and then pushing the front into place before

finally locking it into position using the lock devices (red

buttons. Fig. 14, B) on the activated carbon filter (Fig. 14, C).

6. Proceed as follows to reset the filter saturation display (coun

ter). Select any fan speed using my E or F buttons and

then press the B and F buttons at the same time,

continuing to hold them down for at least 3 seconds until the

flashing letter C stops being shown on the display (D) and then

press the button B.

The activated carbon filter display Is now ready for use again.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

No comments

Aeg 155 D User Manual Page 17