AEG FSK63700P User Manual download pdf (Page 11)

Factory setting: level 4.

How to set the rinse aid level

Make sure the appliance is in user mode.

1. Press .

• The indicators

, , and

are off.

• The indicator continues to

flash.

• The display shows the current

setting: e.g. = level 4.

– The levels of rinse aid range

from 0A to 6A where level 0A

means rinse aid is not used.

2. Press repeatedly to change the

setting.

3. Press on/off to confirm the setting.

6.5 Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs. It is

not possible to deactivate these acoustic

signals.

There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic

signal is deactivated but it is possible to

activate it.

How to activate the acoustic

signal for the end of

programme

Make sure the appliance is in user mode.

1. Press .

• The indicators

, , and

are off.

• The indicator

still flashes.

• The display shows the current

setting: = Acoustic signal off.

2. Press to change the setting.

= Acoustic signal on.

3. Press on/off to confirm the setting.

6.6 AirDry

AirDry improves the drying results with

less energy consumption.

While the drying phase

operates, a device opens the

appliance door. The door is

then kept ajar.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

open. This can cause

damage to the appliance.

CAUTION!

In case of presence of

children, the AirDry system

can be deactivated if you

want to keep the door

closed in the end of the

cycle.

To improve the drying performance refer

to the XtraDry option or activate AirDry.

How to deactivate AirDry

Make sure the appliance is in user mode.

1. Press .

• The indicators

, , and

are off.

• The indicator

still flashes.

• The display shows the current

setting:

= AirDry activated.

2. Press

to change the setting:

= AirDry deactivated.

3. Press on/off to confirm the setting.

ENGLISH

11

1 ... 10 11 12 ... 24

Comments to this Manuals

No comments