AEG FCES User Manual download pdf (Page 24)

osition- and connection instructions

Installation

Unpacking

Check the dishwasher for transport damage. Never connect a damaged

machine. In the case of damage, please contact your retailer.

Keep all packaging away from children.

Check that the following accessories are supplied:

– A funnel for filling salt (1)

– Elbow for discharge hose (2)

Protecting against freezing

If the dishwasher is placed in an environment where the temperature

sometimes fall below 0° C, there is a risk that the small amount of

water which remains inside the parts of the dishwasher will freeze

and damage it. To prevent this you should:

1. Turn off the water supply to the

dishwasher.

2. Remove the water inlet and

discharge hoses.

3. Make sure that there is coarse-

grained salt in the salt container

for the water softener.

The appliance is only to be used and

stored indoors at normal room tempe-

rature. The manufacture is not

responsible for any frost damage.

Positioning

The dishwasher is intended to be installed

on a kitchen sink, worktop or built-in.

To function properly, make sure that the

appliance is level. Its height can be

adjusted with the adjustable feets (5 mm

each). See the illustration for built-in

measurements.

1 2 ... 19 20 21 22 23 24 25 26 27 28

No comments

AEG FCES User Manual Page 24