FAVORIT 55402 VI EN User manual
7. DAILY USE1. Open the water tap.2. Press the on/off button to activatethe appliance. Make sure that the ap-pliance is in setting mode, referto ’SETT
• When the countdown is completed,the programme starts.Opening the door while theappliance operatesIf you open the door, the appliancestops. When you
• To remove easily remaining burnedfood, soak pots and pans in water be-fore you put them in the appliance.• Put hollow items (cups, glasses andpans)
9.1 Cleaning the filtersCBA1.Turn the filter (A) counterclockwiseand remove it.A1A22.To disassemble the filter (A), pullapart (A1) and (A2).3.Remove t
• - The appliance does not drainthe water.• - The anti-flood device is on.WARNING!Deactivate the appliance beforeyou do the checks.Problem Possible so
Refer to ‘HINTS AND TIPS’ forother possible causes.Activating the rinse aiddispenser with the multitaboption activated1. Press the on/off button to ac
www.aeg.com/shop117932981-A-112012
CONTENTS1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. PRODUCT DES
1. SAFETY INFORMATIONBefore the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsib
mains plug, use a 13 amp ASTA (BS1362) fuse.1.3 Use• This appliance is intended to be usedin household and similar applicationssuch as:– Staff kitchen
2. PRODUCT DESCRIPTION11123479 568 101Upper spray arm2Lower spray arm3Filters4Rating plate5Salt container6Water hardness dial7Rinse aid dispenser8Dete
3Delay button4Programme buttons5Indicators6Function buttonsIndicators DescriptionSalt indicator. This indicator is off while the programme oper-ates.R
6) Use this programme to quickly rinse the dishes. This prevents the remaining food tobond on the dishes and bad odours to come out from the appliance
6. BEFORE FIRST USE1. Make sure that the set level of thewater softener agrees with the waterhardness in your area. If not, adjustthe water softener.
Electronic adjustment1. Press the on/off button to activatethe appliance. Make sure that the ap-pliance is in setting mode. Refer to‘SETTING AND START
Comments to this Manuals