23
Switching off the dishwasher
Only switch the dishwasher off when the multi-display indicates “0” for
the cycle time remaining and the end of programme indicator is illumi-
nated.
With some dishwashing cycles, the drying fan continues to run even af-
ter the end of the cycle.
If the acoustic signal has been enabled, a continuous tone will sound
for approx. 15 seconds at the end of the dishwashing cycle.
If the dishwasher is not switched off, then the acoustic signal is repeat-
ed after 3 minutes and after 6 minutes.
1. Press the ON/OFF button. All display indicators will go out.
2. Turn off the water tap.
1 Carefully open the door. Hot steam may escape.
Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for
about 15 minutes before removing them. You also get a better drying
result.
Removing the dishes
3 It is normal for the inner door and the dispensers to be damp.
• Empty the lower basket first, then the upper basket. This way you
avoid dripping water from the upper basket onto dishes in the lower
basket.
• The dishwasher's interior light will always be on when the door of the
appliance is open. Therefore, in order to save energy, you should al-
ways close the door of the dishwasher after having loaded or re-
moved dishes.
Care and cleaning
1
Do not use furniture care products or aggressive cleaners.
• When necessary, clean the dishwasher’s controls with a soft cloth and
clean warm water.
• Occasionally check the internal dispensers, door seal and water inlet
filter (if fitted) for dirt and clean them, if necessary.
Comments to this Manuals