AEG F65712VI0P User Manual download pdf (Page 33)

The rinse aid is automatically released

during the hot rinse phase.

You can set the released quantity of rinse

aid between level 1 (minimum quantity)

and level 6 (maximum quantity). Level 0

will deactivate the rinse aid dispenser

and no rinse aid will be released.

Factory setting: level 4.

How to set the rinse aid level

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously

and until

the indicators , , , and

start to flash and the display is

blank.

2. Press .

• The indicators

, , and

go off.

• The indicator continues to

flash.

• The display shows the current

setting: e.g.

= level 4.

– The levels of rinse aid are

from 0A to 6A.

– Level 0 = no rinse aid is

released.

3. Press

again and again to change

the setting.

4. Press the on/off button to confirm

the setting.

6.4 The rinse aid empty

notification

When rinse aid chamber is empty, the

rinse aid indicator is turned on notifying

to refill rinse aid. If you are using multi-

tabs containing rinse aid and you are

satisfied with the drying result, you can

deactivate the notification for refilling

rinse aid. However, we recommend that

you always use rinse aid for best drying

performance.

If you use standard detergent or multi-

tablets without rinse aid, activate the

notification to keep the rinse aid refill

indicator active.

How to deactivate the rinse

aid dispenser

The appliance must be in programme

selection mode.

1. To enter the user mode, press and

hold simultaneously and until

the indicators , , , and

start to flash and the display is

blank.

2. Press .

• The indicators , , and

go off.

• The indicator

continues to

flash.

• The display shows the current

setting:

= the rinse aid

dispenser is activated (factory

setting).

3. Press

to change the setting.

= the rinse aid dispenser is

deactivated.

4. Press the on/off button to confirm

the setting.

6.5 Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs. It is

not possible to deactivate these acoustic

signals.

There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic

signal is deactivated but it is possible to

activate it.

How to activate the acoustic

signal for the end of

programme

The appliance must be in programme

selection mode.

1. To enter the user mode press and

hold simultaneously and until

the indicators , , , and

start to flash and the display is

blank.

2.

Press

ENGLISH

33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 71 72

Comments to this Manuals

No comments