FAVORIT55502VI0 EN User manual
7. DAILY USE1. Open the water tap.2. Press the on/off button to activatethe appliance. Make sure that the ap-pliance is in setting mode, referto ’Sett
Starting a programme withoutdelay start1. Open the water tap.2. Press the on/off button to activatethe appliance. The indicator of the programme comes
water softener uses the correct quantityof dishwasher salt and water.8.2 Loading the basketsRefer to the supplied leaflet withexamples of the load of
9.1 Cleaning the filtersCAB1.Turn the filter (A) counterclockwiseand remove it.A1A22.To disassemble the filter (A), pullapart (A1) and (A2).3.Remove t
10. TROUBLESHOOTINGThe appliance does not start or it stopsduring operation.Before you contact the Service, refer tothe information that follows for a
Stains and dry water drops on glassesand dishes• The released quantity of rinse aid isnot sufficient. Adjust the rinse aid se-lector to a higher posit
12. ENVIRONMENT CONCERNSRecycle the materials with thesymbol . Put the packaging inapplicable containers to recycle it.Help protect the environment a
ENGLISH 17
18www.aeg.com
ENGLISH 19
CONTENTS1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. PRODUC
www.aeg.com/shop156973110-B-422013
1. SAFETY INSTRUCTIONSBefore the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsi
WARNING!Dangerous voltage.• If the water inlet hose is damaged, im-mediately disconnect the mains plugfrom the mains socket. Contact theService to rep
2. PRODUCT DESCRIPTION1 23456789101Upper spray arm2Lower spray arm3Filters4Rating plate5Salt container6Rinse aid dispenser7Detergent dispenser8Cutlery
4. PROGRAMMESPro-gramme1)Degree ofsoilType of loadProgrammephasesDuration(min)Energy(kWh)Water(l) 2)Normal soilCrockery andcutleryPrewashWash 50 °CRin
5. OPTIONSActivate or deactivate the op-tions before the start of a pro-gramme. You cannot activate ordeactivate the options while aprogramme operates
2. Fill the salt container.3. Fill the rinse aid dispenser.4. Open the water tap.5. Processing residues can stay in theappliance. Start a programme to
6.2 Filling the salt container1.Turn the cap counterclockwise andopen the salt container.2.Put 1 litre of water in the salt con-tainer (only for the f
Comments to this Manuals