SCT51800S0ENFRIDGE-FREEZER USER MANUAL
1. lift the shelf with the sliding box upwardsand out of the holders in the door2. remove the retaining bracket out of theguide under the shelf3. Reve
Hints for refrigerationUseful hints:Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegetabledrawer.For safety, store
CARE AND CLEANINGCAUTION!Unplug the appliance before carrying out any maintenance operation.This appliance contains hydrocarbons in its cooling unit;
It is important to periodically clean the defrostwater drain hole in the middle of the refrigeratorcompartment channel to prevent the water over-flowi
Problem Possible cause SolutionThe appliance does notoperate. The lamp doesnot operate.The appliance is switched off. Switch on the appliance. The ma
Problem Possible cause SolutionThe temperature in the re-frigerator is too high.There is no cold air circulation inthe appliance.Make sure that there
INSTALLATIONWARNING!Read the "Safety Information" carefully for your safety and correct operation of the appli-ance before installing the ap
1Green and Yellow: Earth3Brown: Live5Blue: NeutralAs the colours of the wires in the mains lead of this appliance may not correspond with thecoloured
3. Unscrew the pins (B) and spacers (C).4. Remove the lower door.5. Loosen the lower pin.On the opposite side:1. Install the lower pin.2. Install the
1. If necessary cut the adhesive sealingstrip and then apply it to the applianceas shown in figure.2. Drill the hinge cover A, as shown in fig-ure.App
FOR PERFECT RESULTSThank you for choosing this AEG product. We havecreated it to give you impeccable performance for manyyears, with innovative techno
4. Adjust the appliance in the niche.Make sure that the distance betweenthe appliance and the cupboard front-edge is 44 mm.The lower hinge cover (in t
7. Attach the covers (C, D) to the lugs andthe hinge holes.Install the vent grille (B).Attach the hinge covers (E) to the hinge.8. If the appliance mu
10. Install the part (Ha) on the inner side ofthe kitchen furniture.11. Push the part (Hc) on the part (Ha).12. Open the appliance door and the kitch-
13. Remove the brackets and mark a dis-tance of 8 mm from the outer edge ofthe door where the nail must be fitted(K).14. Place the small square on the
BRRR!HISSS!CLICK!BLUBB!CRACK!SSSRRR!OKCLICK!CLICK!BRRR!BRRR!BLUBB!BLUBB!24 Noises
HISSS!HISSS!SSSRRR!SSSRRR!CRACK!CRACK!ENVIRONMENTAL CONCERNSThe symbol on the product or on its packaging indicates that this product may not betrea
26
27
www.aeg.com/shop 222334725-C-032011
CONTENTS4 Safety information6 Control panel8 First use8Daily use10 Helpful hints and tips12 Care and cleaning13 What to do if…15 Technical data16 Inst
SAFETY INFORMATIONIn the interest of your safety and to ensure the correct use, before installing and first usingthe appliance, read this user manual
– thoroughly ventilate the room in which the appliance is situated• It is dangerous to alter the specifications or modify this product in any way. Any
• Regularly examine the drain in the refrigerator for defrosted water. If necessary, cleanthe drain. If the drain is blocked, water will collect in th
1. Pilot Light2. Temperature Regulator3. FROSTMATIC light4. FROSTMATIC switch5. DYNAMICAIR light6. DYNAMICAIR switchSwitching onInsert the plug into t
If the function is activated automatically the DYNAMICAIR indicator is not shown (refer to"Daily use").The activation of the DYNAMICAIR func
The symbols show different types of frozen goods.The numbers indicate storage times in months for the appropriate types of frozen goods.Whether the up
Comments to this Manuals