AEG Washer L64850L User Manual download pdf (Page 8)

9 DELAY START button

10 Indicator pilot lights

Symbols :

Handwash, Cold, Rinse Hold, Child Lock

Display (7)

7.2

7.3

7.1

7.1 Duration of selected programme:

Duration of selected programme : After selecting a programme, the duration is displayed

in hours and minutes (for example 2.05 ). The duration is calculated automatically on the

basis of the maximum recommended load for each type of fabric. After the programme has

started, the time remaining is updated every minute.

Alarm codes

In the event of operating problems, some alarm codes can be displayed, for example

(see chapter «What to do if...»).

End of programme

When the programme has finished a blinking zero

is displayed, the DOOR pilot light

( 10.2 ), the FUNCTIONING pilot light ( 10.1 ) and the pilot light of button 8 go out and

the door can be opened.

Incorrect option selection

If an option which is not compatible with the set wash programme is selected, the message

Err is displayed for about 2 seconds and the yellow pilot light of button 8 light starts

blinking.

7.2 Delay start:

The selected delay (20 hours max) set by means of the relevant button appears on the

display for about 3 seconds, then the duration of the previously selected programme is

displayed. The symbol 7.2 will appear on the display. The delay time value decreases by one

unit every hour. When only 1 hour remains, the time decreases every minute.

7.3 Child safety lock:

If your laundry is not removed during 10 minutes after the programme is finished, the

backlight of the display switches off and the energy saving system will be enabled.

Only the button 8 pilot light is blinking to indicate that the appliance has to be switched

off.

By pressing any buttons the appliance will come out from the energy saving status and

you could set another washing programme or switch off the appliance.

Control panel

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

No comments

AEG Washer L64850L User Manual Page 8