AEG LM75680F User Manual

LFL76806LM75680FKRW7600EN User Manual

ProgrammeTemperaturerangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Steam Refresh40°C1.5 kg Steam programme for co

Programme1) 2) 3)Spin/Drain Rinse Jeans 20 min.-3Kg Super Eco Cottons Eco

Programmes Load (kg) Energy con-sumption(kWh)Water con-sumption(litre)Approxi-mate pro-gramme du-ration (mi-nutes)Remainingmoisture(%) 1)Standard cott

8. OPTIONS8.1 Programme knobTurn this knob to set a programme. Therelated programme indicator comes on.8.2 Press button to start or interrupt aprogr

9. BEFORE FIRST USE1. Put a small quantity of detergent inthe compartment for washing phase.2. Set and start a programme for cottonat the highest temp

123. To use powder detergent, turn theflap up.A4. To use liquid detergent, turn the flapdown.BWith the flap in the positionDOWN:• Do not use gelatinou

The drain pump can operatefor a short time when theappliance fills water.10.7 Behaviour of theapplianceAfter approximately 15minutes from the start of

In the display comes on and the doorlocked indicator goes off.The indicator of button goes off.1. Press button to deactivate theappliance.Afte

delicate items (e.g. underwired bras,belts, tights, etc. ).• A very small load can cause balanceproblems with the spin phase. If thisoccurs, adjust ma

Always obey the instructionsthat you find on thepackaging of the product.12.3 Maintenance washWith the low temperature programmes itis possible that s

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS.

1.122.2113. 4.125.126.7. 8.12www.aeg.com20

9.12 12.7 Cleaning the inlet hose and the valve filter1.1232.3. 4.45°20°12.8 Emergency drainBecause of a malfunction, the appliancecannot drain the wa

12.9 Frost precautionsIf the appliance is installed in an areawhere the temperature can be less than0° C, remove the remaining water fromthe inlet hos

Problem Possible solution Make sure that the pressure of the water supply is not too low.For this information, contact your local water authority. M

Problem Possible solution Set the drain or the spin programme if there is water in thedrum.Make sure that the appliance receives electrical power.Thi

CAUTION!Make sure that the drum isnot rotating. Wait till thedrum stops rotating, ifnecessary.Make sure that the waterlevel inside the drum is nottoo

www.aeg.com26

ENGLISH27

www.aeg.com/shop132910980-B-092014

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible i

• If the supply cord is damaged, it must be replaced bythe manufacturer, its Authorised Service Centre orsimilarly qualified persons in order to avoid

2.4 UseWARNING!Risk of injury, electrical shock,fire, burns or damage to theappliance.• Use this appliance in a householdonly.• Obey the safety instru

3.3 Fixing plate kit(4055171146)Available from your authorized dealer.If you install the appliance on a plinth,secure the appliance in the fixing plat

4.2 DisplayA B C DATemperature area:Temperature indicatorCold water indicator.BSpin area:Spin speed indicatorNo Spin indicator1)Rinse Hold indicator1)

DTime area:Programme durationDelay startAlarm codesMessage of errorProgramme is completed5. PROGRAMMES5.1 Programme ChartProgrammeTemperaturerangeMaxi

ProgrammeTemperaturerangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Wool/Silk40°C - Cold2 kg1200 rpmMachine washab