AEG LFL75816 User Manual download pdf (Page 14)

8.7 Spin

With this option you can decrease the

default spin speed.

The display shows the indicator of the set

speed.

Additional spin options:

No Spin

• Set this option to remove all spin

phases.

• Set it for very delicate fabrics.

• To compensate for the absence of

spinning, the rinse phase uses more

water for some washing programmes.

• The display shows the indicator

.

Rinse Hold

• Set this option to reduce creasing.

• The washing programme ends with

water in the drum. The drum turns

regularly to reduce creasing.

• The door stays locked. You must drain

the water to unlock the door.

• The display shows the indicator .

To drain the water refer to

"Draining water out after

end of cycle".

8.8 Temp.

Set this option to change the default

temperature.

Indicator

= cold water.

The display shows the set temperature.

9. BEFORE FIRST USE

1. Put 2 litre of water in the detergent

compartment for washing phase.

This activates the drain system.

2. Put a small quantity of detergent in

the compartment for washing phase.

3. Set and start a programme for cotton

at the highest temperature without

laundry.

This removes all possible dirt from the

drum and the tub.

10. DAILY USE

10.1 Activating the appliance

1. Connect the mains plug to the mains

socket.

2. Open the water tap.

3. Press button On/Off to activate the

appliance.

A short tune sounds.

10.2 Loading the laundry

1. Open the appliance door.

2. Put the laundry in the drum, one item

at a time.

3. Shake the items before you put them

in the appliance.

Make sure you do not put too much

laundry in the drum.

4. Close the door firmly.

CAUTION!

Make sure that no laundry

becomes trapped between

the seal and the door. There

is a risk of water leakage or

damage to the laundry.

www.aeg.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comments to this Manuals

No comments