AEG L9FSC949R User Manual download pdf (Page 29)

In this case, for 30 seconds, it is possible

to pause the appliance and remove the

exceeding garments.

Once removed the exceeding garments,

touch the Start/Pause button to start the

programme again. The ProSense phase

can be repeated up to three times (see

point 1).

Important! If the laundry amount will not

be reduced, the washing programme

starts anyway, despite the overload. In

this case, it will be not possible to

guarantee the best washing results.

About 20 minutes after the

programme start, the

programme duration could

be adjusted again

depending on the capacity

of water absorption of the

fabrics.

The ProSense detection is

carried out with complete

washing programmes only

(no skipping phase

selected).

11.8 Programme phase

indicators

When the programme starts the indicator

of the running phase flashes and the

other phase indicators are steady on.

E.g. the washing or pre wash phase is

running:

.

When the phase ends the relevant

indicator stops flashing and is steady on.

The next phase indicator starts flashing.

E.g. the rinse phase is running:

.

During the washing cycle, the appliance

mixes the detergent, the stain removal

for fabric treatment and/or the fabric

softener with water before introducing

them into the drum; the indicator

MIX

appears and disappears on the display

according to the different programme

phases (the arrows flash alternatively).

If you select the Plus Steam the steam

phase indicators come on.

The steam phase is running: .

The anti-crease phase is running:

.

11.9 Interrupting a

programme and changing the

options

When the programme is running, you

can change only some options:

1. Touch the button Start/Pause.

The related indicator flashes.

2. Change the options. The given

information in the display changes

accordingly.

3. Touch the button Start/Pause again.

The washing programme continues.

11.10 Cancelling a running

programme

1. Press the button On/Off to cancel

the programme and to deactivate

the appliance.

2. Press the button On/Off again to

activate the appliance.

Now, you can set a new washing

programme.

If the ProSense phase is

already carried out and the

water filling is already

started, the new programme

starts without repeating

the ProSense phase. The

water and the detergent are

not drained out in order to

avoid waste. The display

shows the maximum

duration of the programme,

updating it about 20 minutes

after the starting of the new

programme.

11.11 Opening the door -

Adding garments

ENGLISH 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Comments to this Manuals

No comments