AEG L8WEC166R User Manual download pdf (Page 33)

The regular detergents already contain

water softening agents, but we

recommend to run a cycle with empty

drum and a descaling product

occasionally.

Always follow the

instructions that you find on

the packaging of the

product.

15.3 Maintenance wash

The repeated and prolonged use of low

temperature programmes can cause

detergent deposits, fluff residues,

bacterial growth inside the drum and the

tub. This could generate bad odours and

mildew.

To eliminate these deposits and

hygienize the inner part of the appliance,

run a maintenance wash regularly (at

least once a month):

1. Remove all laundry from the drum.

2. Run a cotton programme with the

highest temperature with a small

quantity of powder detergent.

15.4 Door seal

Regularly examine the seal and remove

all objects from the inner part.

15.5 Cleaning the drum

Regularly examine the drum to prevent

rust particles.

For a complete cleaning:

1. Clean the drum with special products

for stainless steel.

Always follow the

instructions that you find on

the packaging of the

product.

2. Run a short cotton programme at

high temperature with empty drum

and with a small quantity of powder

detergent , in order to rinse out any

left residues.

15.6 Cleaning the detergent

dispenser

To prevent possible deposits of dried

detergent or clotted fabric softener

and/or formation of mould in the

detergent dispenser drawer, once in a

while carry out the following cleaning

procedure:

1. Open the drawer. Press the catch

downwards as indicated in the

picture and pull it out.

1

2

2. Remove the top part of the additive

compartment to aid cleaning and

flush it out under running warm

water, to remove any traces of

accumulated detergent. After

cleaning, replace the top part in its

position.

3. Make sure that all detergent residue

is removed from the upper and lower

part of the recess. Use a small brush

to clean the recess.

ENGLISH

33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Comments to this Manuals

No comments