AEG L8FS86699 User Manual download pdf (Page 15)

For more details, refer to Stand-by

paragraph in Daily Use chapter.

6.2 Introduction

The options/functions are

not selectable with all

washing programmes. Check

the compatibility between

options/functions and

washing programmes in the

"Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

Make sure the screen and

touch buttons are always

clean and dry.

6.3 Temp.

When you select a washing programme,

the appliance automatically proposes a

default temperature.

Touch this button repeatedly until the

desired temperature value appears on

the display.

When the display shows the indicators

and , the appliance does not

heat the water.

6.4 U./Min.

When you set a programme, the

appliance automatically selects the

maximum spin speed.

Touch this button repeatedly to:

• Decrease the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Activate the Rinse Hold option .

The water of the last rinse is not

drained out to prevent the fabrics

from creasing. The washing

programme ends with water in the

drum and the final spin phase is not

performed.

The display shows the indicator .

The drum turns regularly to reduce

creasing.

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

Touch Start/Pause button: the

appliance performs the spinning

phase and drains the water.

• Activate the Extra Silent option.

All spinning phases (intermediate spin

and final spin) are suppressed and the

programme ends with water in the

drum. This helps to reduce creasing.

As the programme is very quiet, it is

suitable for use at night time when

cheaper electricity tariffs are available.

In some programmes the rinses are

performed with more water.

The display shows the indicator

.

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

Touch the Start/Pause button: the

appliance performs only the draining

phase.

The appliance empties the

water out automatically after

approximately 18 hours.

6.5 Flecken/Vorw.

Press this button repeatedly to activate

one of the two options or both.

The relevant indicator goes on in the

display.

• Flecken

Select this option to pre-treat heavily

soiled or stained laundry using stain

remover.

Pour the stain remover into

compartment . The stain remover is

pre-mixed and heated with detergent

in order to improve its effectiveness.

This option can increase

the programme duration.

This option is not

available with a

temperature lower than

40 °C.

• Vorwäsche

ENGLISH

15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Comments to this Manuals

No comments