AEG L87695WD User Manual download pdf (Page 21)

With the flap in the

position DOWN:

• Do not use

gelatinous or thick

liquid detergents.

• Do not put more

liquid detergent than

the limit showed in

the flap.

• Do not set the

prewash phase.

• Do not set the delay

start function.

5. Measure out the detergent and the

fabric conditioner.

6. Carefully close the detergent

dispenser.

Make sure that the flap does not cause a

blockage when you close the drawer.

9.5 Activating the appliance

1. Open the water tap.

2. Connect the mains plug to the mains

socket.

3. Press button Aan/Uit - Marche/Arrêt

to activate the appliance.

A short tune sounds.

9.6 Setting a programme

1. Turn the programme knob and set

the programme:

• The related programme indicator

comes on.

• The indicator of Start/Pauze -

Départ/Pause flashes.

• The display shows: the default

temperature, the spin speed, the

indicators of the programme

phases and the programme

duration.

2. If necessary, change the

temperature, the spin speed, the

cycle duration, or add available

options. When you activate an

option, the indicator of the set

option comes on.

If you set something

incorrect, the display shows

the message Err.

9.7 Starting a programme

without the delay start

Press button Start/Pauze - Départ/Pause

to start the programme.

The relevant indicator stops to flash and

stays on.

On the display the indicator of the phase

is operation starts to flash.

The programme starts, the door is

locked. The display show the indicator

.

The drain pump can operate

for a short time when the

appliance fills water.

9.8 Behaviour of the appliance

After approximately 15

minutes from the start of the

programme:

• The appliance adjusts

automatically the cycle

time to the laundry you

have put in the drum to

have perfect washing

results in the minimum

necessary time.

• The display shows the

new time value.

9.9 Starting a programme with

the delay start

1. Press button Startuitstel - Départ

Différé again and again until the

display shows the number of minutes

or hours of delay.

The related indicator comes on.

2. Press button Start/Pauze - Départ/

Pause.

The appliance starts the countdown of

the delay start.

When the countdown is completed, the

programme starts automatically.

Before you press button

Start/Pauze - Départ/Pause

to start the appliance, you

can cancel or change the set

of the delay start.

ENGLISH 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 75 76

Comments to this Manuals

No comments