AEG L87495XFL User Manual download pdf (Page 28)

Problem Possible cause Possible solution

The appliance fills

with water and

drain immediately.

The end of the drain

hose is too low.

Make sure that the drain hose is

in the correct position.

The washing re-

sults are not satis-

factory.

The detergent you used

was not sufficient or cor-

rect.

Increase the detergent quantity

or use a different one.

You did not remove the

stubborn stains before

you wash the laundry.

Use special products to remove

the stubborn stains.

Incorrect temperature

was set.

Make sure that you set the cor-

rect temperature.

Too much laundry load. Decrease the laundry load.

After the check, activate the appliance.

The programme continues from the

point of interruption.

If the problem occurs again, contact the

service centre.

If the display shows other alarm codes,

contact the service centre.

13. INSTALLATION

13.1 Fixing plate kit

(4055171146)

Available from your authorized dealer.

If you install the appliance on a plinth,

secure the appliance in the fixing plates.

Follow the instructions supplied with the

kit.

13.2 Unpacking

1.

Use the gloves. Remove the external

film. If necessary, use a cutter.

28

www.aeg.com

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 67 68

Comments to this Manuals

No comments