AEG L82470BI User Manual download pdf (Page 26)

Problem Possible cause/Solution

Spinning starts late or

the machine does not

spin:

The electronic unbalance detection device has cut in

because the laundry is not evenly distributed in the

drum. The laundry is redistributed by reverse rota-

tion of the drum. This may happen several times be-

fore the unbalance disappears and normal spinning

can resume. If, after some minutes, the laundry is still

not evenly distributed in the drum, the machine will

not spin.

• The laundry load is perhaps to little, add more

items, redistribute the load manually and then se-

lect the spinning programme.

No water is visible in

the drum:

Appliances based on modern technology operate

very economically using very little water without af-

fecting performance.

The display shows the

alarm code

Anti-flooding system has activated.

• Pull out the plug from the power socket, close the

water tap and contact the Service Force Centre.

13. INSTALLATION

13.1 Unpacking

Use the gloves. Remove the external

film. If necessary, use a cutter.

Remove the cardboard top.

Remove the polystyrene packaging

materials.

www.aeg.com

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

No comments

AEG L82470BI User Manual Page 26