AEG L7WBG741R User Manual download pdf (Page 14)

6. DIAL AND BUTTONS

6.1 Introduction

When pressing a key

combination, do not tilt

your fingers downwards .

The sensors of the

underneath buttons are

sensitive and may interfere

with Your choice.

6.2 On/Off

Pressing this button for a few seconds

allows to activate or deactivate the

appliance. Two different tunes sound

while switching the appliance on or off.

As the Stand-by function automatically

deactivates the appliance to decrease

the energy consumption in a few cases,

you may need to activate the appliance

again.

For more details, refer to Stand-by

paragraph in Daily Use chapter.

6.3 Introduction

The options/functions are

not selectable with all

washing programmes. Check

the compatibility between

options/functions and

washing programmes in the

"Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

6.4 Temp.

When you select a washing programme,

the appliance automatically proposes a

default temperature.

Touch this button repeatedly until the

desired temperature value appears on

the display.

When the display shows the indicators

and , the appliance does not

heat the water.

6.5 Spin

When you set a programme, the

appliance automatically sets the

maximum spin speed allowed.

Touch repeatedly this button to:

• Decrease the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Activate the No Spin option .

This option is available only with the

Spin/Drain programme. The

appliance skips all spin phases and

only drains the water. The display

shows the indicator .

6.6 Stains/Prewash

Press this button repeatedly to activate

one of the two options.

The relevant indicator goes on in the

display.

• Stains

Select this option to add an anti-stain

phase to a programme in order to

treat heavily soiled or stained laundry

with stain remover.

Pour the stain remover into

compartment . The stain remover

will be added in the appropriate

phase of the washing programme.

This option is not

available with a

temperature lower than

40 °C.

• Prewash

Use this option to add a pre-wash

phase at 30 °C before the washing

phase.

This option is recommended for

heavily soiled laundry, especially if

containing sand, dust , mud and other

solid particles.

The options can increase the

programme duration.

www.aeg.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Comments to this Manuals

No comments