AEG L7FEE68SC User Manual download pdf (Page 13)

Spin speed indicator.

Rinse hold indicator.

Extra silent indicator.

Temperature indicator. The indicator appears when a cold wash is

set.

6. DIAL AND BUTTONS

6.1 On/Off

Pressing this button for a few seconds

allows to activate or deactivate the

appliance. Two different tunes sound

while switching the appliance on or off.

As the Stand-by function automatically

deactivates the appliance to decrease

the energy consumption in a few cases,

you may need to activate the appliance

again.

For more details, refer to Stand-by

paragraph in Daily Use chapter.

6.2 Introduction

The options/functions are

not selectable with all

washing programmes. Check

the compatibility between

options/functions and

washing programmes in the

"Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

6.3 Teplota

When you select a washing programme,

the appliance automatically proposes a

default temperature.

Touch this button repeatedly until the

desired temperature value appears on

the display.

When the display shows the indicators

and , the appliance does not

heat the water.

6.4 Odstřeďování

When you set a programme, the

appliance automatically sets the

maximum spin speed allowed.

Touch repeatedly this button to:

• Decrease the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Activate the Rinse Hold option.

The final spin is not performed. The

water of the last rinse is not drained

out to prevent the fabrics from

creasing. The washing programme

ends with water in the drum.

The display shows the indicator .

The door stays locked and the drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

If you touch the Start/Pauza button,

the appliance performs the spinning

phase and drains the water.

The appliance empties

the water out

automatically after 18

hours approximately.

• Activate the Extra Silent option.

The intermediate and the final

spinning phases are suppressed and

the programme ends with water in the

drum. This helps to reduce creasing.

The display shows the indicator .

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Comments to this Manuals

No comments