AEG L7FEE68SC User Manual download pdf (Page 15)

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

As the programme is very quiet, it is

suitable for use at night time when

cheaper electricity tariffs are available.

In some programmes the rinses are

performed with more water.

If you touch the Start/Pauza button,

the appliance performs the only

draining phase.

The appliance empties

the water out

automatically after 18

hours approximately.

• Activate the drain-only option

(Skipping the wash, rinse and spin

phases): Pouze vypouštění.

The appliance performs the only

draining phase of the selected

washing programme.

The display shows the indicator

(cold), and the indicator (no

spin) and the indicator .

• Activate the spin-only option

(Skipping the wash and rinse

phases): Pouze odstřeďování.

Before setting this

option, select a suitable

washing programme for

the garments. The

appliance will performs

the most fitting spin cycle

for your garments care

(e.g. For synthetics items,

first select the Syntetické

washing programme and

then the Pouze

odstřeďování option).

The appliance performs only the

spinning phase of the selected

washing programme.

The display shows the indicator

(cold), the phase indicator and the

spin speed.

7.5 Skvrny/Předpírka

Press this button repeatedly to activate

one of the two options.

The relevant indicator goes on in the

display.

• Skvrny

Select this option to add an anti-stain

phase to a programme in order to

treat heavily soiled or stained laundry

with stain remover.

Pour the stain remover into

compartment . The stain remover

will be added in the appropriate

phase of the washing programme.

This option is not

available with a

temperature lower than

40 °C.

•

Předpírka

Use this option to add a pre-wash

phase at 30 °C before the washing

phase.

This option is recommended for

heavily soiled laundry, especially if

containing sand, dust , mud and other

solid particles.

The options can increase the

programme duration.

7.6 Pára plus

This option adds a steam phase followed

by a short anti-crease phase at the end

of the washing programme.

The steam phase reduces fabric creasing

and facilitates the fabric ironing.

The indicator flashes on the display

during steam phase.

This option can increase the

programme duration.

When the programme stops the display

shows a zero

, the indicator is

steady on and the indicator starts

flashing. The drum performs smooth

movements for about 30 minutes to keep

the steam benefit. By touching any

button the anti-crease movements stop

and the door unlocks.

A small laundry load helps to

reach better results.

ENGLISH 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Comments to this Manuals

No comments