AEG L75480WD User Manual download pdf (Page 19)

10.7 Behaviour of the

appliance

After approximately 15

minutes from the start of the

programme:

• The appliance adjusts

automatically the cycle

time to the laundry you

have put in the drum to

have perfect washing

results in the minimum

necessary time.

• The display shows the

new time value.

10.8 Starting a programme

with the delay start

1. Press button Delay Start again and

again until the display shows the

number of minutes or hours of delay.

The related indicator comes on.

2. Press button Start/Pause.

The appliance starts the countdown of

the delay start.

When the countdown is completed, the

programme starts automatically.

Before you press button

Start/Pause to start the

appliance, you can cancel or

change the set of the delay

start.

10.9 Cancelling the delay start

To cancel the delay start:

1. Press button Start/Pause to set the

appliance to pause.

The related indicator flashes.

2. Press button Delay Start repeatedly

until the display shows .

3. Press button Start/Pause again to

start the programme immediately.

10.10 Interrupting a

programme and changing a

function

You can change only some options

before they operate.

1. Press button Start/Pause.

The related indicator flashes.

2.

Change the function set.

3. Press the button Start/Pause again.

The programme continues.

10.11 Cancelling a running

programme

1. Press button On/Off to cancel the

programme and to deactivate the

appliance.

2. Press button On/Off again to activate

the appliance.

Now, you can set a new washing

programme.

Before starting the new

programme the appliance

could drain the water. In this

case, make sure that the

detergent is still in the

detergent compartment, if

not fill the detergent again.

10.12 Opening the door

If the temperature and level

of the water in the drum are

too high and the drum still

rotates you cannot open the

door.

While a programme or the delay start

operates, the appliance door is locked.

1. Press button Start/Pause.

In the display the related door lock

indicator goes off.

2. Open the appliance door.

3. Close the door and press button

Start/Pause.

The programme or the delay start

continues.

10.13 End of cycle

When the programme has finished, the

appliance stops automatically. The

acoustic signal operates (if it is active).

In the display

comes on and the door

locked indicator goes off.

The indicator of Start/Pause button goes

off.

1. Press button On/Off to deactivate

the appliance.

ENGLISH

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comments to this Manuals

No comments