AEG L6FBG842R User Manual download pdf (Page 13)

6.2 Introduction

The options/functions are

not selectable with all

washing programmes. Check

the compatibility between

options/functions and

washing programmes in the

"Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

6.3 Temperature

When you select a washing programme,

the appliance automatically proposes a

default temperature.

Touch this button repeatedly until the

desired temperature value appears on

the display.

When the display shows the indicators

and , the appliance does not

heat the water.

6.4 Spin

When you set a programme, the

appliance automatically sets the

maximum spin speed allowed.

Touch repeatedly this button to:

• Decrease the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Activate the Rinse Hold option.

The final spin is not performed. The

water of the last rinse is not drained

out to prevent the fabrics from

creasing. The washing programme

ends with water in the drum.

The display shows the indicator

.

The door stays locked and the drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

If you touch the Start/Pause button,

the appliance performs the spinning

phase and drains the water.

The appliance empties

the water out

automatically after 18

hours approximately.

• Activate the Extra Silent option.

The intermediate and the final

spinning phases are suppressed and

the programme ends with water in the

drum. This helps to reduce creasing.

The display shows the indicator .

The door stays locked. The drum

turns regularly to reduce creasing.

You must drain the water to unlock

the door.

As the programme is very quiet, it is

suitable for use at night time when

cheaper electricity tariffs are available.

In some programmes the rinses are

performed with more water.

If you touch the Start/Pause button,

the appliance performs the only

draining phase.

The appliance empties

the water out

automatically after 18

hours approximately.

6.5 Stains/Prewash

Press this button repeatedly to activate

one of the two options.

The relevant indicator goes on in the

display.

• Stains

Select this option to add an anti-stain

phase to a programme in order to

treat heavily soiled or stained laundry

with stain remover.

Pour the stain remover into

compartment

. The stain remover

will be added in the appropriate

phase of the washing programme.

This option is not

available with a

temperature lower than

40 °C.

• Prewash

Use this option to add a pre-wash

phase at 30 °C before the washing

phase.

This option is recommended for

heavily soiled laundry, especially if

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Comments to this Manuals

No comments