USER MANUALEN User ManualWashing MachineL6FB67400
Make sure that the drainhose makes a loop toprevent particles going intothe appliance from the sink.6. Position the hose directly to a built-indrain p
1Worktop2Detergent dispenser3Control panel4Door handle5Rating plate6Drain pump filter7Feet for levelling the appliance8Drain hose9Inlet hose connectio
5.2 DisplayMIXMaximum load indicator. The indicator flashes during the laundryload estimation.Door locked indicator.Delay start indicator.The digita
Rinse hold indicator.Extra silent indicator.Time saving indicator.6. KNOB AND BUTTONS6.1 Ein /Aus Pressing this button for a few secondsallows to acti
In some programmes the rinses areperformed with more water.If you touch the Start/Pause button,the appliance performs the onlydraining phase.The appli
This option increases slightlythe programme duration.6.10 Zeitvorwahl With this option you can delay the startof a programme in a more convenienttime.
Programme Programme description20 Min. - 3 kgCotton and synthetic items lightly soiled or once worn.OutdoorSynthetic sport items. This programme is de
Programme Default tempera-tureTemperaturerangeMaximum spin speedSpin speed rangeMaximum loadPflegeleicht40 °C60 °C - Cold1200 rpm1200 rpm - 400 rpm4 k
ProgrammeBaumwolle Pflegeleicht Feinwäsche Wolle/Seide Anti-Allergie 20 Min. - 3 kg Outdoor Daunen LeichtbügelnPumpen/Schleudern U./Min.
8. SETTINGS8.1 Child LockWith this option you can prevent childrenfrom playing with the control panel.• To activate/deactivate this option,touch the U
CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...
2. Shake the items before you put themin the appliance.3. Put the laundry in the drum, one itemat a time.Make sure not to put too much laundryin the d
4. To use liquid detergent, turn the flapdown.With the flap in theposition DOWN:• Do not usegelatinous or thickliquid detergents.• Do not put moreliqu
Changing the delay start afterthe countdown has startedTo change the delay start:1. Touch the Start/Pause button topause the appliance. The relatedind
2. Change the options. The giveninformation in the display changesaccordingly.3. Touch the button Start/Pause again.The washing programme continues.10
1. If necessary, touch the U./Min. buttonto decrease the spin speed proposedby the appliance.2. Touch the Start/Pause button:• If you have set , the
11.2 Stubborn stainsFor some stains, water and detergent isnot sufficient.We recommend that you pre-treat thesestains before you put the items in thea
The regular detergents already containwater softening agents, but werecommend to run a cycle with emptydrum and a descaling productoccasionally.Always
4. Insert the detergent drawer into theguide rails and close it. Run therinsing programme without anyclothes in the drum.12.7 Cleaning the drain pumpW
5. When the bowl is full of water, closethe drainage duct back and emptythe container.6. Repeat the steps 4 and 5 until thewater stops to flowing out.
12.8 Cleaning the inlet hoseand the valve filterIt is recommended to clean both thefilters of the inlet hose and valveoccasionally to remove any depos
1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f
13. TROUBLESHOOTINGWARNING!Refer to Safety chapters.13.1 IntroductionThe appliance does not start or it stopsduring operation.First try to find a solu
Problem Possible solutionThe appliance does notfill with water properly.• Make sure that the water tap is open.• Make sure that the pressure of the wa
Problem Possible solutionThe appliance makes anunusual noise and vi-brates.• Make sure the levelling of the appliance is correct. Refer to"Instal
Programmes Load(kg)Energyconsump-tion (kWh)Waterconsump-tion (litre)Approxi-mate pro-grammeduration(minutes)Remain-ing mois-ture (%)1)Baumwolle 60°C 1
Energy Efficiency Class A+++ -30%Spin Speed Maximum 1400 rpm1) Connect the water inlet hose to a water tap with a 3/4'' thread.16. ACCESSORI
your local recycling facility or contactyour municipal office.*ENGLISH35
www.aeg.com/shop192943510-A-222017
• The appliance must be connected to the water mainsusing the new supplied hose sets, or other new hosesets supplied by the Authorised Service Centre.
access to the mains plug after theinstallation.• Do not touch the mains cable or themains plug with wet hands.• Do not pull the mains cable todisconne
3. Remove the cardboard top and thepolystyrene packaging materials.4. Open the door and remove thepolystyrene piece from the door sealand all the item
12. Refer to the illustration. Make surethat the barriers are securelyattached.x4ABAttach the sound barriers ata room temperature.13. Pull up the appl
x4The appliance must be level and stable.A correct adjustment of theappliance level prevents thevibration, noise and themovement of the appliancewhen
AIf this occur, close the water tap andcontact the authorized service centre toreplace the hose.3.5 Water drainageThe drain hose should stay at a heig
Comments to this Manuals