AEG L61470BI User Manual download pdf (Page 31)

1

2

Hinges

To mount the hinges it is necessary to drill

two holes (dia. 35 mm, depth12.5-14 mm

depending on the depth of door furniture) on

the inner side of the door.

The distance between the hole fixing centres

must be 416 mm. The distance from upper

edge of the door to the centre of the hole

depends on the adjacent furniture's

dimensions.

The hinges will be fixed to the door by means

of screws for wood 1 and 2 supplied with the

appliance.

B

A

Mounting the door

WARNING!

Do not remove the screw B.

Fix the hinges to the appliance by means of

the M5x15 screws.

The hinges can be adjusted to compensate

for possible uneven thickness of the door.

To align the door perfectly it is necessary to

loosen the screw, adjust the door and tighten

the screw A again.

A

B

C

Counter-magnet

WARNING!

Do not remove the screw B.

The appliance is pre set for a magnetic door

closure. To position the closure correctly, it is

necessary to screw the counter-magnet A

(steel disk + rubber ring) into the inner side of

the door.

Its position must correspond to the magnet B

on the appliance.

A

B

C

E

D

WARNING!

Do not remove the screw B.

If the door has to be opened from left to

right, invert the position of the plates E, the

magnet D and the plate C. Mount the

counter-magnet D and the hinges A as

previously described.

ENGLISH 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments