Aeg L61470BI User Manual download pdf (Page 29)

13.4 The inlet hose

20

O

20

O

20

O

45

O

45

O

45

O

• Connect the hose to the appliance.

Turn the inlet hose only left or right.

Loose the ring nut to set it in the cor-

rect position.

• Connect the water inlet hose to the

cold water tap with 3/4 thread.

CAUTION!

Make sure that there are no leaks

from the couplings.

Do not use an extension hose if

the inlet hose is too short. Con-

tact the service centre for the re-

placement of the inlet hose.

Water pressure

The appliance works correctly if the wa-

ter pressure is not less than 0.05 MPa

(0.5 bar).

If you can not connect the water inlet

hose to the cold water tap of the primary

hydraulic system, connect it to your do-

mestic cold water storage system.

Make sure not to have more than a dis-

tance of 5.02 m (16.5 ft) between the ap-

pliance inlet hose and the bottom of the

water storage tank.

ENGLISH 29

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments